The use of LED hard light strip and LED soft light strip

Led lamps to come with many accessories, such as lamp beads, wires, resistors, etc. Generally speaking, the length of each light strip is 10-100 meters. Before we buy, we can measure the required size, and then let the merchant cut the size for you. Compared with traditional incandescent lamps, energy-saving lamps have incomparable advantages, but in terms of energy-saving and environmental protection, they are not as good as LED strips.


LED light strips are divided into LED hard light strips and LED soft light strips. LED flexible light strips are divided into high voltage and low voltage, while hard light strips are mainly low voltage. Led hard light strips have a good heat dissipation effect and relatively long service life, so they are widely used in high-end places with high-quality requirements; Led soft light strips are inexpensive and changeable in appearance, so they are accepted by ordinary consumers in the market.


LED strips are generally fixed with 3M glue. When installed outdoors, it is often windy and rainy, which will reduce the viscosity for a long time and cause the LED light strip to fall off. Outdoor installation generally adopts the method of fixing the card slot, and the card slot needs to be cut and connected. The method is the same as indoor installation, but additional waterproof glue is needed to consolidate the waterproof effect of the connection point. Then use the special fixing clip to fix it. You can drill holes with an electric hammer, and fix the clamps with plastic expansion tubes and screws.


Led hard light bar adopts a PCB hardboard to assemble the circuit board. The LED is assembled from chip LEDs and in-line LEDs. Use different components according to different requirements. The utility model has the advantages of convenient fixing and convenient processing and installation. The disadvantage is that it cannot be bent at will and is not suitable for use in irregular places. The SMD LEDs used for hard strips include 18 LEDs, 24 LEDs, 30 LEDs, 36 LEDs, 40 LEDs, and many other specifications. LEDs with 18, 24, 36, and 48 embedded LEDs have different specifications on the front and side. Sidelights are also called Great Wall lights.

Leave a comment

Please note, comments must be approved before they are published