Jadisi: Indoor LED lights have a "fog" problem

The fog of Indoor LED lights is problematic, because it will produce water droplets and fog in the inner cavity of the housing after lighting for a period of time. LED lights are generally assembled from several different types of raw materials. For example, the Led lamp generates a certain amount of heat when it is working. Different raw materials have different linear expansion coefficients. After long-term application, different raw materials will be connected. When used in an environment with high ambient humidity, the temperature inside and outside the lampshade will be different. The heated steam in the lampshade will become colder at the lampshade. After re-lighting for a period of time, this situation will subside. Therefore, the cold and humid environment is also a factor that endangers the service life of the LED strip.

Indoor LED light belt usage rules and maintenance methods:

1. After purchasing the lamps, don't be busy installing them. Read the installation instructions carefully, and then install the good lamps according to the installation instructions, otherwise there may be risks.

Indoor LED light

2. During cleaning and maintenance, do not change the structure of the lamp, and do not change the parts of the lamp at will. After maintenance, the lamp should be installed as it is, and many lamp components have been installed or installed incorrectly.

3. When using as few lamps as possible, use the power switch as little as possible. Although the power switching frequency of LED lights is about 18 times that of ordinary fluorescent tubes, too high frequency will still endanger the service life of the internal electronic components of the indoor LED lamp belt, thereby endangering the service life of the lamp. .

Leave a comment

Please note, comments must be approved before they are published