Jadisi: Factors that determine the price of Home led strip lights

  1. Home led strip lights size

The price of LEDs of different specifications and sizes is different. For example, the price of 0603 LED and 1210 or 3528 LED are quite different; and the price of LED of 1210 and 5050 specifications is another step.

  1. Chips used in Home led strip lights

There are domestic and imported chips. The price varies greatly depending on the chip. What chip is used? What kind of effect do you want to achieve? Be sure to know before you buy.

  1. Home led strip lights package

Divided into resin packaging and silicone packaging. The price of resin encapsulation is cheaper. Everything else is the same. Silicone encapsulation has good heat dissipation performance, so the price is slightly more expensive than resin encapsulation.

Home led strip lights

  1. The color consistency of Home led strip lights

At present, there are many packaging factories in China. There are thousands of companies, big and small, and of course there are strengths and weaknesses. There are many small packaging factories that do not have spectroscopy and color separation machines, so they either do not perform spectroscopy or are outsourced, which makes it difficult to guarantee the quality. LEDs that have not undergone light and color separation have poor color consistency, and the effect after lighting on the LED strip is not so good, of course, the price difference is relatively large.

  1. Home led strip lights welding effect

The assembly of LED strips is divided into manual welding and machine welding. Manual soldering is to use a soldering iron, using a more primitive method for soldering. The products with this kind of operation have an ugly appearance (the solder joint size is inconsistent with Fuzhou LED electronic display screens) and the other is that the electrostatic maintenance measures are not good. Machine soldering uses reflow soldering, but machine soldering is different. Not only the appearance of the soldered product is beautiful (the solder joints are the same size, the solder joints are smooth, there is no flux residue, and the LED package is intact), but the chip will not be burnt by static electricity. At the same time, the LED position and direction are more beautiful. This can be seen directly from the appearance.

  1. FPC material

FPC is divided into two types: rolled copper and copper-clad. Copper-clad boards are cheaper, and rolled copper is more expensive. The pads of the copper-clad board are easy to fall off when bent, but the rolled copper will not. The specific FPC material to be used depends on the seller's decision according to the environment in which it is used.

Leave a comment

Please note, comments must be approved before they are published