Jadisi: What is the reason why the Indoor led strip ligh is not lit?

There are generally two reasons why the indoor led strip ligh does not light up. One is that all the lights in a strip will not light up, and the other is that only one section will not light up. The former kind of reason is probably caused by the power plug falling off and turning off the power. In other words, the power socket of the connector is broken. Check if the power plug is sturdy or not.

The other kind of problem is more common, and the problems caused are likely to be very diverse;

1. The light strip is broken

2. Resistor open welding: The first two are generally caused by excessive distortion and pulling of the light strip during the whole installation process.

3. Resistor burnt out, integrated IC burnt out: Long-term lighting of the LED strip causes over-temperature, and there is also a possibility that the LED lamp burns out due to the working voltage, and the resistor is penetrated due to excessive current or working voltage , The resistor suffers more serious damage, so the whole meter of the lamp does not light up, this is very obvious, usually there will be burnt marks, you can take a closer look.

Leave a comment

Please note, comments must be approved before they are published