Jadisi: Several common installation methods of Indoor led strip ligh
Indoor led strip ligh is a relatively common linear lighting product. The installation methods for different indoor spaces are different. Today we will mainly share a few more common indoor led strip ligh installation methods.
1. Installation in the room: When the LED light belt is used for interior decoration, it can be installed in the cabinet body by sticking. When used in the large living room ceiling ceiling lamp, it can be installed in the slot lock type. According to the specific installation position, To clarify its installation method
Light strips in the room are commonly found in: bookcases, entrance halls, shoe racks, wardrobes, kitchen cabinets, TV background walls, etc.
2. Outdoor installation: For outdoor installation, you must fully consider the factors such as moisture-proof and sun-proof isolation. First, you must choose light strips with modified characteristics. For outdoor door applications, you can choose silicon rubber starlight strips to prevent moisture and Corrosion, corrosion resistance, UV resistance, etc. The installation method includes a slot and lock installation. Outdoor light strips used in water must be installed at IP68 waterproof level.
3. Switching power supply connection mode: Indoor led strip ligh is generally a bottom-pressure lamp strip with a working voltage of 24v or 12v, so a switching power supply circuit power supply system must be used. The size of the switching power supply depends on the output power of the LED strip and the length of the connection. clear.
If you don’t expect each LED strip to be operated by a switching power supply, you can choose a switching power supply circuit with a larger output power as the master switching power supply, and then type all the LED strips into the switching power supply and connect them in series. Switching power supply circuit power supply system. The benefit of that is that the system can be controlled centrally, and the inconvenient area is that the actual effect of lighting and the power switch operation of a single LED light strip cannot be completed.