Jadisi: Common installation methods for Home led strip lights

Home led strip lights are one of the most common linear lighting products on the market. Different varieties of applications and different indoor spaces, such as bedrooms, bathrooms, kitchens, etc., can be perfectly controlled by this type of indoor LED strip lights. The methods are different. Today we will mainly share a few of the more common LED strip installation methods.

1. When indoor led strip light is installed in the room for interior decoration, it can be installed by sticking on the cabinet body, and by using the ceiling lamp in the large living room, it can be installed by slot and lock. According to the specific installation position, To clarify its installation method

Light strips in the room are commonly found in: bookcases, entrance halls, shoe racks, wardrobes, kitchen cabinets, TV background walls, etc. Installing the light strips in these locations will give you a sense of ceremony.

Home led strip lights

2. Outdoor installation: The outdoor installation must fully consider factors such as moisture-proof and sun-proof isolation. You must first select a light strip with modified characteristics. For outdoor door applications, you can choose LED strips with protective covers. In view of the characteristics of moisture-proof, corrosion-resistant, corrosion-resistant, and UV-resistant, the installation.

methods include trough type installation and lock-type installation. Outdoor LED strips used in water must be waterproof in accordance with the IP68 standard.

3. Switching power supply connection mode: Home led strip lights are generally low-voltage light strips with a working voltage of 24v or 12v. Therefore, a switching power supply circuit must be used to power the system. The size of the switching power supply should be based on the output power of the LED strip and the length of the connection. clear.

Indoor led strip light
If you don’t expect each Home led strip lights to be operated by a switching power supply, but you want to buy a switching power supply circuit with a larger output power as the master switching power supply, and then connect all the LED strip lights into the switching power supply in series. And unified the power supply system by the main switching power supply circuit. The biggest benefit of this is that it can control the system more centrally, while its disadvantage is that it cannot complete the actual lighting effect and power switch operation of a single LED light strip.

Leave a comment

Please note, comments must be approved before they are published